Wascomat Clarus Control SU620 - Page 45

45
Troubleshooting
NOT DRAINED
The water level exceeds EMPTY at wash program start.
Try to restart the machine (i.e. reset the error code) by pressing START. If
the error returns, first verify these items:
• Isthedrainisblockedbyufforfoam?
• Arethethelevelhoseandairboxblocked(blowintothelevelhose)?
• Formachineswithadrainpump,verifycorrectionoperation.
• Doeswaterrunoutwhenthepowerswitchonthemachineisswitched
off?
• Verifytheoperationofthedrainusingtheserviceprogramme.
• Isthedrainintheroomcapableofreceivingthewaterfromthe
machine?