C-4 Specifications
Wash Between injections
Priority sample Programmable
Communication
Outputs Relay output, 28V AC/DC max, I
max
= 0.25A
Inputs 2 programmable TTL inputs, programmable as
Hold inject (default) and Stop inject
Communication port Ethernet
Options (factory installed)
Sample tray cooling Built-in Peltier cooling
Range: 4°C to ambient - 3°C
Air temperature in sample compartment: 4°C ±
2°C (at temperature sensor)
(Temperature at 80% relative humidity and
25°C ambient temperature)
Options (user installable)
Biocompatible sample
flow path and valve
Inert sample needle (Silco steel) and
biocompatible valve (PEEK)
Prep kit 2.5 mL syringe, prep valve, 10 mL sample loop,
LSV needle, and sample tray for 10 mL vials
Programming
Active low
VCC
Input
GND
10K
To Next Page
Loading...
