1726 North Ballard Road - Appleton, WI 54911 - 920.991.9082
Technical Support 800.238.8739 - TechSupport@WaupacaElevator.com
PM0010-B
/18/2011
CRUSH
HAZARD
CUTTING
HAZ ARD
CRUSH
HAZARD
CRUSH
HAZARD
CRUSH
HAZARD
CRUSH
HAZ ARD
ECO-SYSTEM
HAZ ARD
ELECTRIC
HAZ ARD
FALLING
HAZ ARD
INHALATION
HAZ ARD
CRUSH
HAZARD
KINK
HAZ ARD
MISSILE
HAZ ARD
CRUSH
HAZARD
PINCH
HAZ ARD
PROJECTILE
HAZ ARD
PUNCTURE
HAZ ARD
ANTI-
STATIC
ALERT
STATIC
HAZ ARD
ELECTRICITY
For purposes of visual clari cation, some parts have been
omitted from certain illustrations.
Illustrations are of typical parts and may not match your
materials exactly.
Illustration Noti cation
Waupaca Elevator Company subscribes to the ACCESSIBILITY EQUIPMENT MANUFACTURERS ASSOCIATION
(AEMA) Code of Ethical Practices:
Be it resolved that we will conduct our business a airs in such a manner that they will be fair to all parties concerned.
Ethical Standards
Danger!
Indicates a condition where failure to follow
exact instructions or heed warnings may result
in equipment damage, personal injury or death.
Safety Alerts
Introduction
These symbols will remind you of potential injury.
Important
Indicates critical information that should be
reviewed carefully.
General Reminders
This manual is designed as a guide to the installation
and maintenance of this Waupaca Elevator unit. The
instructions are designed to help ensure the safe
installation and operation of this unit. Read them
carefully before beginning installation.
Inspect for visible signs of damage or missing parts
BEFORE beginning installation. The nal check list
indicates all components included with this order.
Work by others to include, but not limited to, the
hoistway construction, supports for guide rails and an
electrical fused disconnect to control panel.
Do not expose electrical components to the elements or
extreme temperature uctuations. Resulting condensa-
tion will damage equipment, causing it to malfunction. If
exposed, let sit for 12-24 hours prior to operation.
Safe operation requires a maintained hoistway
and mechanical room temperature between 60° F
to 110° F.
• And further resolved, that we will manufacture and/or distrib-
ute only products which re ect good quality, safety and the
best engineering practices for any given application.
• And further resolved, that we will respect our competitors
deserving of our respect.
• And further resolved, that we will refrain from being deroga-
tory.
• And further resolved, that we will not take unfair advantage of
our dealers.
• And further resolved, that we will always uphold the high
standards and the purposes of AEMA.
• And further resolved, that we will refuse to be party to
any of the following: price xing, collusion monopoly,
non-code compliance, deviation from speci cations after
quoting, and knowingly endorsing members of this or
any other trade association if they are not quali ed or are
known to be unethical or dishonest.
Installation should be done by a trained authorized
Elevator Contractor in accordance with these
instructions and in compliance with requirements
of National Elevator Code, National Electrical Code,
American Standard Safety Code, and State and
Local Building Codes.
GENERAL INFORMATION
W
E
To Next Page
Loading...