Waves E MOTION LV1 Classic - Page 35

35
Waves eMotion LV1 Classic User Guide | Chapter 1: Mixer
Window Window
Solo/Mute
Solo and Mute buttons are in the
middle of the channel strip. A mute
activated by the user for a specific
channel will be solid red; a mute
activated by a mute group or solo
will flash when a Mute button on
channel is flashing.
Solo/cue button is at the bottom of
the channel strip. Mute is in the
middle. A mute group is activated
on the touchscreen.
Channel Meters
Inside the scribble strip.
Under the faders.
Shortcuts
Recall two programmable
commands.
N/A
Mode Selection
The Mode selector is not part of a
channel strip, but the mode choice
influences the functionality of the
strip.
Use the mode selector buttons on
the touchscreen.
Use the mode selector buttons on
the touchscreen.