Webdyn WebdynSunPM - Page 100

100
USER MANUAL – WebdynSunPM
Version 2.05
préliminaire
The 2 servers’ parameters are:
Web interface
Parameter in the
<uid>_config.ini configuration
file
Description
Interface
SERVER_Interface
SERVER2_Interface
Selection of the network interface
to use for the server:
• Ethernet (see section
3.2.2.3: “Networks”)
• Modem (see section
3.2.2.4: “Modem”)
Type
SERVER_Type
SERVER2_Type
Server protocol selection:
• FTP: FTP server
• SFTP: SFTP server
• MQTT: MQTT server
• MQTTS: secure MQTT
server
• MQTTS for AWS IoT:
MQTTS server on “AWS IoT”
• MQTTS for Google Cloud
IoT: MQTTS server on
“Google Cloud IoT”
Address
SERVER_Address
SERVER2_Address
IP address or server name
Port
FTP_Port
FTP2_Port
FTP/SFTP server port
Login
FTP_Login
FTP2_Login
User name used by the
concentrator for the connection to
the remote FTP/SFTP server
Password
FTP_Password
FTP2_Password
Password used by the concentrator
for the connection to the remote
FTP/SFTP server
2 steps for put file
disabled
FTP_TwoStepsSendingDisabled
FTP2_TwoStepsSendingDisabled
Choice of file transfers in 2 steps
using a temporary file while the file
is not complete on the remote
server:
• Checked: disabled
• Unchecked: enabled
Configuration
directory
FTP_DirConfig
FTP2_DirConfig
Configuration file directory on the
FTP/SFTP server.
Data directory
FTP_DirData
FTP2_DirData
Data file directory on the FTP/SFTP
server.
Alarm directory
FTP_DirAlarm
FTP2_DirAlarm
Alarm file directory on the
FTP/SFTP server.
Command
directory
FTP_DirCmd
FTP2_DirCmd
Command file directory on the
FTP/SFTP server.