USER MANUAL – WebdynSunPM
Version 2.05
préliminaire
Examples:
WPM00C44F_MODBUS_210112_105947.csv.gz
WPM00C44F_IO_210202_084443.csv.gz
WPM00C44F_TIC_210202_095243.csv.gz
Every declared and configured device acquires its data over a defined period (see section 3.2.1:
“Devices”) and regularly uploads it to a server (see section 3.2.2.5: “Servers”) in the “DATA”
directory.
The concentrator stores the data until it has been uploaded to the server. This makes it
possible to resend it if the transfer fails.
When the concentrator memory is full, new data is not stored until the memory has
been emptied by uploading files to a server.
The concentrator can store up to 50Mb of uncompressed data per defined device.
The WebdynSunPM permanently collects the device and interface data and saves it. The
reported values are always raw and must be connected to the device definition file. The
contents of a data file are in 2 parts which are:
• A header: which is different depending on the device or interface.
• Data: which is formatted identically for all devices and interfaces.
4.1.3.1 TIC header
The TIC data file header is the following:
Colour code:
• Black: Fixed text
• Blue: Device-specific information or data.
Where:
• sn_N: TIC meter “serialNumber” indicated in the <uid>_daq.csv configuration file
• fileDefinitionName: Definition file name for the TIC meter
4.1.3.2 Input/Output (IO) header
The IO data file header is the following:
SNTIC;sn_1;001
TypeTIC;fileDefinitionName
TypeIO;fileDefinitionName
To Next Page
Loading...
