Webdyn WebdynSunPM - Serial

91
USER MANUAL – WebdynSunPM
Version 2.05
préliminaire
Web
interface
Parameter in the
<uid>_config.ini configuration
file
Description
Identifier
Concentrator_Identifier
Concentrator identifier
By default, a unique “WPMxxxxxx” identifier is filled in. The “xxxxxx” corresponds to the last 6
characters of the concentrator’s MAC address indicated on the product label. (see section
2.2.2: “Identification”)
Identifier
The identifier is used when creating the names of the files uploaded to the server. It
is important that it be unique to be able to know where the files on the remote
server come from.
The concentrator identifier is identified as follows in the document: <uid>.
3.2.2.2 Serial
The “serial” part is used to configure 3 RS485/422 serial ports each with their own settings
and output. (see section 2.4.6: “RS485/RS422 Serial interface”)
Cancel
Apply the changes