Prerequisite
As the WebdynSunPM concentrator’s role is to send the data it collects to an IS, installation
requires knowledge of the concentrator but also of the IS it will upload its data to.
The following elements are required to guarantee a proper installation:
- To have this user manual to hand.
- To have a screwdriver suitable for the connector types available on the
WebdynSunPM.
- To have knowledge of the parameters to connect to the IS information system.
It is also strongly recommended to have the elements described below for any
intervention on site and to install the product.
- To have a SIM card with an activated M2M subscription (data and text messages
(optional)) and knowledge of the supplier’s APN. The SIM card call number can be
useful.
- Use a remote antenna if radio or cellular modem reception is deteriorated.
- To have a PC for the product configuration or update using the concentrator’s Web
interface
Unpacking
2.2.1 Content
The standard version of the WebdynSunPM concentrator is delivered with:
• an angled SMA antenna for the modem (taped to the back of the product)
• a battery (already in place in the product)
2.2.2 Identification
The commercial reference is composed as follows:
• WG0517-A01: WebdynSunPM Europe and India version
Each product is labelled with the following information:
To Next Page
Loading...
