Webdyn WebdynSunPM - Page 92

92
USER MANUAL – WebdynSunPM
Version 2.05
préliminaire
The possible settings for each serial port are:
Web interface
Parameter in the
<uid>_daq.csv configuration
file
Description
Protocol
protocol
The protocol type for this serial
interface:
• Modbus: serial port configured
in modbus RTU mode
• SMANET: serial port configured
for the SMA-Net protocol.
• PW1: serial port configured for
the PowerOne protocol.
Mode
wires
Serial interface mode:
• RS485 2 wires: Half-Duplex (2
wires) RS485 serial connection
• RS485 4 wires: Full-Duplex (4
wires) RS485 or RS422 serial
connection
Baudrate
baudrate
Serial connection speed in bauds:
• 1200
• 2400
• 4800
• 9600
• 19200
List of serial ports
Selected serial port settings
Cancel
Apply the
changes