• mask: subnet mask configured on the ethernet 2 interface
• gateway: the gateway address used by the concentrator to connect to an external
network on the ethernet 2 interface
• dns: the list of DNS servers used to resolve names for the ethernet 2 interface If several
DNS servers are configured, they are delimited by the “/” character
4/6
apn=<apn>
rssi=<rssi>
status=<status>
• apn: the APN name configured for the modem
• rssi: modem signal strength
• status: modem connection status. The possible values are:
o connected: the modem is currently connected to the mobile data network and
is currently transferring data
o disconnected: the modem is not currently connected to the mobile data
network
5/6
srv=<server>
status=<status>
type=<type>
mode=<mode>
addr=<ipaddr>
port=<port>
last=
• server: configured server 1 name
• status: indicates whether server 1 is enabled or not. The possible values are:
o enabled: server 1 is enabled
o disabled: server 1 is disabled
• type: indicates the server type. The possible values are:
o ftp : server 1 is of the FTP type
o sftp: server 1 is of the SFTP type
o mqtt: server 1 is of the MQTT type
o mqtts: server 1 is of the MQTTS type
• mode: the server 1 running mode. The possible values are:
o strategy_wsun1_compliant_backup: the server is an FTP type server and is
configured as a backup server
o strategy_wsun1_compliant: the server is an FTP type server and is configured
as the main server
o strategy_wsun1_compliant_backup_secured: the server is an SFTP type server
and is configured as a backup server
o strategy_wsun1_compliant_secured: the server is an SFTP type server and is
configured as a backup server
• ipaddr: configured server 1 address
To Next Page
Loading...
