Webdyn WebdynSunPM - Page 128

128
USER MANUAL – WebdynSunPM
Version 2.05
préliminaire
/CMD
Read/Write/Delete
Contains the commands.
The command file has the following format:
“<uid>_cmd.csv”
/ALARM
Write
Contains the alarms.
The alarm file name is in the following format:
“<uid>_AL_<timestamp>.csv.gz”
/LOG
Write
Contains the log and debug files.
The log file has the following format:
“<uid>_LOG_<timestamp>.log.gz”
The debug file has the following format:
“<uid>_SYSTEME_<timestamp>.tar.gz”
/BIN
Read
Contains the update files.
The concentrator update has the following
format:
“wgapp_<version>.spm”
Where:
• <uid>: Concentrator identifier (site)
• <timestamp>: The timestamp format is “YYMMDD_HHMMSS” so that an alphabetical
sort of the directory gives the chronological order
• <interface>: the interface name from a defined list (see section 3.1.2.2.2: “Definition
file content”)
• <comment>: free user field
• <version>: update version number.
The data, alarm and log files are compressed to the Gzip format “.gz”.
The minimum access rights to the different directories must be defined as specified in the
table above.
If the directories are not created at the concentrator connection, or if the rights are
not sufficient to upload or download files, contact the server administrator.
All files exchanged between the concentrator and the server must have standard
UTF-8 encoding.
Operation:
If the “FTP_TwoStepsSendingDisabled” or “FTP2_TwoStepsSendingDisabled” parameter
equals “1”, the concentrator uploads the files to the FTP server using a 2 step process:
1. At the start of the transfer the file has an additional ".tmp” extension.
2. When the file transfer is complete, it is renamed by removing the ".tmp" extension.