The concentrator can be configured in several ways:
• Using configuration files uploaded to an FTP/SFTP server.
• Using the concentrator’s web interface
• Using text message commands
FTP configuration is the preferred solution to remotely configure and maintain devices to
service the equipment pool. If the local web interface and the FTP files are modified at the
same time, the FTP files take precedence. Any modifications to files on the FTP server will
overwrite any possible local modifications.
Please note that on the first start-up, at least the following items need to be configured using
text messages or the local web interface (0 - The “Modem” part is used to configure the
modem and get network information. To use the modem, the SIM card must first be inserted
into the product (see section 2.4.2.2: “SIM card”).
To Next Page
Loading...
