Webdyn WebdynSunPM - Page 48

48
USER MANUAL – WebdynSunPM
Version 2.05
préliminaire
SCHEDULE_Params[index]=Id|Type|StartTime|Interval|Count
Each configured row therefore contains the following configuration information:
Parameter
Description
Default value
Id
Configuration line identifier.
This identifier must be unique.
Type
Indicates the schedule type. The authorised
values are:
• everyday: the schedule will be run
every day
• monday: the schedule will be run
every Monday
• tuesday: the schedule will be run
every Tuesday
• wednesday: the schedule will be run
every Wednesday
• thursday: the schedule will be run
every Thursday
• friday: the schedule will be run every
Friday
• saturday: the schedule will be run
every Saturday
• sunday: the schedule will be run
every Sunday
• first: the schedule will be run on the
1
st
of the month
• middle: the schedule will be run on
the 15th of the month
• last: the schedule will be run on the
last day of the month.
Everyday
StartTime
Indicates the task start time in the following
format: “HH:MM:SS”.
00:00:00
Interval
Indicates the connection repeat interval in
minutes.
1440
Count
Indicates the maximum number of
connections in one day
1
Thus, with the following schedule on the Schedule 1 connection: