Webdyn WebdynSunPM - Page 53

53
USER MANUAL – WebdynSunPM
Version 2.05
préliminaire
type
ip
mask
gateway
dns1
dns2
LAN1
192.93.121.37
255.255.255.0
192.93.121.1
192.93.121.8
0
LAN2
192.168.2.12
255.255.255.0
tcpInterFrameMs
0
If the file is modified using “Excel” type spreadsheet software, the format may be
modified and the “;” delimiters replaced by “,”, making it unusable by the
concentrator. Always make sure to indicate the delimiter format when saving.
3.1.2.1.3.3 Serial port configuration
Serial port configuration is based on the following parameters:
Parameter
Description
Default value
Type
Device type.
The possible values are:
• SERIAL1: to configure the “Serial 1”
interface
• SERIAL2: to configure the “Serial 2”
interface
• SERIAL3: to configure the “Serial 3”
interface
SERIAL1 for the first line
SERIAL2 for the second line
SERIAL3 for the third line
Baudrate
Speed in bauds to use for the serial connection.
The possible values are:
• 1200
• 2400
• 4800
• 9600
• 19200
• 38400
• 57600
• 115200
• 230400
• 460800
115200
DataBits
Number of data bits per byte.
The possible values are:
• 7
• 8
8
Parity
The parity type to apply to validate data on the
serial link.
The possible values are:
• N: no parity
• O: odd parity
N