WEEDO X40 - WiiBuilder Support Tab Configuration

35
Pic65
The Speed Tab features the following options:
• Top/Bottom Speed (mm/s): Sets the printing speed of the top and bottom surfaces of the
model.
• Outer shell speed (mm/s): Sets the printing speed of the external shell surfaces.
• Inner shell speed (mm/s): Sets the printing speed of the internal shell surfaces.
• Infill Speed (mm/s): Sets the printing speed of the infill inside the model.
• Support Infill Speed (mm/s): Sets the printing speed of infill inside the model supports.
• Support Interface Speed (mm/s): Sets the printing speed of the top and bottom surfaces
of the model supports.
• Initial Layer Speed (mm/s): Sets the printing speed of the first layer of the model.
• Travel speed (mm/s): Sets the movement speed of the nozzle when not printing.