Weidmüller 610 - Configuration (Continued); Time Recording; Operating Hours Meter; Serial Number (addr. 754)

32 2576780000/00/02-2018
Conguration
Total running time of the comparator
The total running time of a comparator is the sum of all time for
which there is a limit value violation in the comparator result.
The total running time of the comparator can only be reset via the
ecoExplorer go software. The reset is carried out for all total run-
ning times.
Fig.: Operating hours meter of the measured value display
The Energy Meter 610/610-PB shows the number 140.8 h in the
operating hours meter. This corresponds to 140 hours and 80 in-
dustrial minutes. 100 industrial minutes correspond to 60 minutes.
In this example, 80 industrial minutes therefore represent 48 min-
utes.
Serial number (addr. 754)
The serial number shown by Energy Meter 610/610-PB has 6 dig-
its and is part of the serial number displayed on the nameplate.
The serial number cannot be changed.
Serial number display
Serial number
information
on the nameplate:
XX00-0000
Software release (addr. 750)
The software for Energy Meter 610/610-PB is continuously im-
proved and expanded. The software version in the device is
marked with a 3-digit number, the software release. The user can-
not change the software release.
Time recording
The Energy Meter 610/610-PB records the operating hours and
the total running time of each comparator
• where the time of operating hours is measured with a resolution
of 0.1 h and is displayed in hours or
• the total running time of the comparator is represented in sec-
onds (when 999999 seconds is reached, the display changes
to hours).
For the querying of measured value displays, the times are marked
with the numbers 1 to 6:
none = operating hours meter
1 = total running time, comparator 1A
2 = total running time, comparator 2A
3 = total running time, comparator 1B
4 = total running time, comparator 2B
5 = total running time, comparator 1C
6 = total running time, comparator 2C
A maximum of 99999.9 h (= 11.4 years) can be shown on the
measured value display.
Operating hours meter
The operating hours meter measures the time for which the Energy
Meter 610/610-PB records and displays measured values.
The time of operating hours is measured with a resolution of 0.1 h
and is displayed in hours. The operating hours meter cannot be
reset.