WEIHONG NC65C User Manual

上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
Phoenix Double-tool CNC System Users’
Manual
Version: 2019.5 1st Version
Author: Document Department
Weihong Corporation, All Rights Reserved
1 Overview ............................................................................................................................................ 1
1.1 NC65C Industrial Personal Computer ........................................................................ 1
1.1.1 Layout ........................................................................................................................ 1
1.1.2 Mounting Dimension ............................................................................................ 2
1.1.3 Performance ............................................................................................................ 2
1.2 Main Software Interface .................................................................................................. 3
1.2.1 Operator Interface ................................................................................................. 4
1.2.2 Technician Interface ............................................................................................. 7
2 Commissioning ............................................................................................................................. 10
2.1 Clear I/O Port Alarms .................................................................................................... 10
2.1.1 Clear the E-stop Alarm...................................................................................... 10
2.1.2 Clear the Limit Alarm ........................................................................................ 10
2.1.3 Clear the Drive Alarm ....................................................................................... 11
2.2 Set Drive Parameters ..................................................................................................... 11
2.3 Clear Drive Alarms.......................................................................................................... 12
2.4 Set Commissioning Parameters ................................................................................. 12
2.5 Adjust the Axis Direction ............................................................................................. 14
2.6 Confirm Machine Coordinates of Double Tools ................................................... 14
2.7 Execute Analog Machining .......................................................................................... 16
3 Quick Start ...................................................................................................................................... 17

WEIHONG NC65C Specifications

General

Brand	WEIHONG
Model	NC65C
Category	Control Systems
Language	English

Summary

Overview of the Phoenix Double-tool CNC System

NC65C Industrial Personal Computer

Details about the NC65C industrial personal computer, its features, and compatibility.

Main Software Interface

Overview of the software interface divided into Operator and Technician interfaces.

Commissioning Procedures

Clear I/O Port Alarms

Procedure to clear common I/O port alarms for better system and servo drive communication.

Set Drive Parameters

Steps to set drive parameters via the software after connecting to the servo drive.

Confirm Machine Coordinates of Double Tools

Returning to machine origin and setting datum for double tools.

Quick Start Guide

Load a Tool Path

Procedure for loading a tool path file for machining operations.

Set the Workpiece Origin

Defining the coordinate origin by clearing workpiece coordinates for each axis.

Execute Automatic Machining

Starting machining operations using standard or remote modes.

Common Operations

Customize Common Parameters

Customizing parameter lists for quick access to frequently used parameters.

Execute I/O Port Related Operations

Monitoring machine status, conducting simulation tests via I/O ports.

Special Operations

Select the Tool(s)

Choosing tools for adjustment or to continue machining if one tool fails.

Measure Height

Ensuring consistent stand-off distance between tool and workpiece surface.

Frequently Asked Questions (FAQs)

Questions during Returning to the Machine Origin

Common issues related to returning the machine to its origin point.

Questions about Alarms

Common alarms encountered during system operation.