上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
16 / 36
4. Measure the distance between tools of X1-axis and X2-axis, and set the
measured value as the value of parameter Machine Origin Position(X2).
Note: Parameter Machine Origin Position(X1) and parameter Machine Origin Position(X2) should
be modified synchronously to confirm that the difference between machine origin of X1-axis and
X2-axis keeps the measured value.
5. Switch to Technician interface, and switch to Reference mode.
6. To set datum for the axis that has returned to the machine origin, click
Machine Tool → Datum Setting.
After setting datum, the sign appears before the related axis.
2.7 Execute Analog Machining
This operation is used to know the running area and the speed steadiness of the
machine tool before machining. During executing analog machining, the machine
tool moves like normal machining without turning on/off valves.
To execute analog machining, click Analog in the function control area.
To Next Page
Loading...
Need help?
General
