上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
7 / 36
1.2.2 Technician Interface
Technician interface is shown as follows:
1. Menu bar
2. CNC status bar
3. Machine control area
4. Mode control area
5. Function control area
6. Operational buttons
7. Function windows
1.2.2.1 CNC Status Bar
This bar is used to check the following:
• Current system status, including Idle, Run, etc.
• System prompts and alarms.
Double click the blank area. Log dialog box will pop up. You can check system
logs in it.
See Check System Logs for details.
To Next Page
Loading...
Need help?
General
