上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
6 / 36
1.2.1.4 Speed Control Area
This area consists of the following:
• Current actual speed: used to show current actual speed.
• Feedrate override: used to adjust the feedrate override.
1.2.1.5 Function Control Area
This area is used to do the following:
• Execute common operations, including returning to the machine origin,
returning to the loading point and switching the station.
• Execute jiggle. See Execute Jiggle for details.
• Turn on/off common ports, including water valve, abrasive valve, oil pump,
high pressure valve and lube.
• Enable/disable analog. See Execute Analog Machining for details.
• Enable/disable simulation. See Simulate Machining for details.
1.2.1.6 Function Window
This area is used to show the machining track in real time during machining, analog
or simulation, so as to ensure the proper implementation of the tool path file.
1.2.1.7 CNC Status Bar
This bar is used to check the following:
• Current system status, including Idle, Run, etc.
• System prompts and alarms.
Double click the blank area. Log dialog box will pop up. You can check system
logs in it.
See Check System Logs for details.
To Next Page
Loading...
Need help?
General
