上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
4 / 36
1.2.1 Operator Interface
Operator interface is shown as follows:
1. Title bar
2. Axis coordinates display area
3. Tool selecting and machining mode display area
4. Axis direction and mode selecting area
5. Speed control area
6. Function control area
7. Operational buttons
8. Function window
9. CNC status bar
1.2.1.1 Title Bar
This bar consists of the system name, current configuration, current date and time,
and burger button .
Among them, burger button is used to do the following:
• Set parameters.
• Measure height.
• Control valve.
• Enter into NcCloud.