上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
9 / 36
1.2.2.5 Function Windows
Function windows include the following:
• Track window: used to show the machining track in real time during
machining, analog or simulation.
• Offset window: used to set workpiece offset and public offset.
• Common window: used to check, modify and customize common parameters.
See Customize Common Parameters for details.
• Port window: used to check and modify the port polarity, conduct a simulation
test, and set filter.
See Execute I/O Port Related Operations for details.
To Next Page
Loading...
