WEILER E1650 REMIXING TRANSFER VEHICLE
2-19
Machine Controls
2
Machine Controls
Other Controls
(1) Battery Ground Disconnect Switch
(2) Wait to Disconnect Lamp
NOTICE: Do not turn Battery Ground Disconnect
Switch (1) off while lamp (2) is illuminated. Lamp
remains on approximately 2 minutes after engine is shut
down. Disconnecting battery too soon may cause damage
to the engine or emission control system.
(3) Engine Stop Button
(4) Storage Cleanout Doors Switch
Turn CW to turn on electrical system.
Turn CCW to turn off electrical system.
Lamp illuminates on T4F engines during DEF
purge cycle.
Press to stop engine quickly.
Pull to enable engine startup.
Push up to close storage cleanout doors.
Push down to open storage cleanout doors.