Weiler E1650 - Page 79

WEILER E1650 REMIXING TRANSFER VEHICLE
3-29
Operating Instructions
3
Cleaning or Removing Material
5. Use Hopper Cleanout Door Switch (5) to open dump
hopper cleanout door (2).
6. Use Manual Elevator Switch (3) to reverse the
elevator chain and dump hopper augers to cleanout
elevator and hopper.
7. Turn engine off and remove material from cleanout door and inside of hopper. Clean sealing
edges of door and openings thoroughly to enable door to fully close.
8. Close door.
WARNING
Falling load can crush.
Never work under lifted load unless load is securely supported to prevent
falling.
WARNING
Entanglement in rotating augers can crush or cut off hands and feet.
Stay away from rotating augers. Keep auger guards in place during
operation. Stop engine and remove ignition key before servicing or cleaning
augers.
2
3
5