Weiler E1650 - Page 81

WEILER E1650 REMIXING TRANSFER VEHICLE
3-31
Operating Instructions
3
Cleaning or Removing Material
Storage Conveyor & Hopper Cleanout
The storage conveyor and hopper are equipped with cleanout doors for access to storage augers,
conveyor slats and chain for inspection, cleaning and material removal.
1. Release all storage cleanout door latches (1).
2. Open (2) all storage cleanout doors.
3. Use Manual Storage Conveyor/Auger Switch (3) to
reverse the storage conveyor, if conveyor is empty.
If storage conveyor is full, alternate switch between
reverse and forward to rock conveyor chain to
attempt to free conveyor.
WARNING
Entanglement in rotating augers can crush or cut off hands and feet.
Stay away from rotating augers. Keep auger guards in place during
operation. Stop engine and remove ignition key before servicing or cleaning
augers.
1
1
3
2