WM 68331 04/2021
LIFE-BASE EN 113
7 Disassembly
7.1.3 Removing the protective bag for
LIFE-BASE 1 NG and LIFE-BASE 1 NG XL
1. Place the portable unit on a flat, firm surface.
2. Open the magnetic locks or hook and loop fasteners on
the front and back of the protective bag.
3. If available: Pull the breathing circuit through the opening
on the protective bag.
4. Open the snap fasteners on the portable unit.
5. Remove the portable unit backwards out of the protective bag.
Result The protective bag is removed from the portable unit.
To Next Page
Loading...
Need help?
General
