Weinmann LIFE-BASE Series User Manual

Name: Weinmann LIFE-BASE Series
Brand: Weinmann
Rating: 4 (1 reviews)

180 pages

To Next Page

To Previous Page

146 EN LIFE-BASE

WM 68331 04/2021

7 Disassembly

7.5.7 Removing the device from LIFE-BASE Mini II

Applies to • MEDUMAT Standard

• MEDUMAT Easy

CPR

• MODUL

Required auxiliary

equipment

Screwdriver with crosshead PH1

Requirement Disassembly is prepared (see "7.5.1 Preparing disassembly",

page 123).

1. Place the portable unit on the narrow, closed side.

Table of Contents2
Introduction5
About this Document5
Explanation of Warnings5
Safety7
Intended Purpose7
Intended Application Areas8
Possible Side-Effects and Complications8
Exclusions and Restrictions of Intended Purpose8
Clinical Benefits of the Product9
Requirements for the User9
Preventing a Device Failure10
Ensuring Good Hygiene Practices10
Safe Use of the Portable Unit and Accessories11
Description12
Overview12
Accessories and Other Parts20
Assembly25
Attaching the Protective Bag to the Portable Unit25
Attaching the Accessories Bag to the Portable Unit or Protective Bag32
Attaching the Belt to the Portable Unit36
Attaching the Oxygen Cylinder to the Portable Unit38
Attaching the Devices to the Portable Unit43
Use Screws 100 and Protective Disks 104 to Screw the Device to the Spacer Plate60
MEDUMAT Standard63
MEDUVENT Standard63
MEDUMAT Easy CPR63
If Available: Connect the Device to the Power Supply According to the Instructions for Use65
With MEDUMAT Standard Place the Cable for the Power Supply in the Cable Clamp65
Attaching the Ventilator and MEDUCORE Standard70
Applies to MEDUMAT Standard70
With MEDUMAT Standard and MEDUMAT Easy CPR Connect the Low-Pressure Hose to the Compressed Gas Connection on the Side or on the Rear of the Ventilator70
Place Devices with the Control Panel Membrane Facing down70
MEDUCORE Standard71
Function Check81
Intervals82
Checking the Portable Unit Visually82
Checking the Cylinder Brackets83
Checking the Locking of the Wall Mounting or Ceiling Mounting83
Checking the Lock of the Retaining Claws84
Checking the Screws on the Wall Mounting85
Checking the Pole Mounting85
Checking the Bag86
Checking the System for Leaks87
Rectifying Leaks in the System88
Operation90
Fastening the Portable Unit to a Wall Mounting or Ceiling Mounting90
Removing the Portable Unit from the Wall Mounting or Ceiling Mounting92
Fastening the Portable Unit to the Pole or Equipment Rail95
Removing the Portable Unit from the Pole or Equipment Rail103
Storing Device Accessories109
Disassembly110
Removing the Protective Bag from the Portable Unit110
Removing the Accessories Bag from the Portable Unit or Protective Bag115
Remove the Accessories Bag from the Protective Bag118
Result the Accessories Bag Is Removed from the Protective Bag118
Removing the Accessories Bag for118
Removing the Belt from the Portable Unit119
The Portable Unit119
Removing the Oxygen Cylinder from the Portable Unit121
Removing the Device from the Portable Unit123
Remove the Accessories Bag from the Portable Unit124
Required Auxiliary Equipment134
Hygienic Reprocessing148
Intervals150
Preparing Hygienic Reprocessing150
Cleaning Parts Manually151
Wipe Disinfecting Parts152
Reprocessing Parts Mechanically153
Preparing Parts for Reuse154
Cleaning and Disinfection Plan155
Maintenance157
Intervals157
Storage158
Transport159
Disposal160
Portable Units and Accessories Without a Charging Interface160
Portable Units and Accessories with a Charging Interface160
Contaminated Parts160
Scope of Supply161
Accessories and Other Parts161
Technical Data173
Symbols175
Warranty177
Declaration of Conformity178

Brand	Weinmann
Model	LIFE-BASE Series
Category	Medical Equipment
Language	English

Weinmann LIFE-BASE Series User Manual

Table of Contents

Questions and Answers:

Weinmann LIFE-BASE Series Specifications

Related product manuals