26 EN LIFE-BASE
WM 68331 04/2021
4 Assembly
5. If available: Feed the breathing circuit on the front through
the opening on the protective bag.
6. Close the hook and loop fasteners on the front of
the protective bag.
Result The protective bag is attached to the portable unit.
4.1.2 Attaching the protective bag for
LIFE-BASE 1 NG XS
1. Place the portable unit on a flat, firm surface.
2. With the ventilator:
• Push the bottom of the protective bag from the front into
the space between the portable unit and the ventilator.