Weinmann MEDUMAT Standard2 User Manual

62 EN MEDUMAT Standard
2
WM 68071 05/2021
4 Preparation and operation
3. Perform inhalation (see "4.7.7 Performing inhalation (only
with Inhalation option)", page 75).
Result Inhalation via the inhalation adapter is prepared.
4.4.7 Connecting the etCO
2
/O
2
nasal cannula
1. Position the etCO
2
/O
2
nasal cannula.
2. If necessary: Fix the tubes of the etCO
2
/O
2
nasal cannula to
the face using adhesive plasters.
3. Connect the inhalation inlet of the etCO
2
/O
2
nasal cannula
to the inhalation outlet of the pressure reducer.
4. Connect the CO
2
inlet of the etCO
2
/O
2
nasal cannula with
water filter to the measuring circuit connector.
Result CO
2
monitoring is prepared via an external interface.
As an alternative to the etCO
2
/O
2
nasal cannula, you can also
connect the CO
2
measuring tube to the measuring circuit
connector and couple with the CO
2
connector of a breathing
system filter or a bag-valve mask.

Weinmann MEDUMAT Standard2 Specifications

General

Brand	Weinmann
Model	MEDUMAT Standard2
Category	Medical Equipment
Language	English