Welbilt Convotherm 4 - Page 125

9 Servicing / Cleaning
Training manual Convotherm 4 125
3.
To do this, place the adjustment gauge for table-top units in the
position shown in the illustration.
4.
Check that the door gap lies in the OK range of the adjustment
gauge for table-top units.
Adjusting the door gap on table-top units: Front section
1.
Close the appliance door.
2.
Place the adjustment gauge for table-top units in the position
shown in the illustration.
3.
Check that the door gap lies in the OK range of the adjustment
gauge for table-top units.