EasyManua.ls Logo

Welch Allyn Connex Spot Monitor - Physical Specifications

Welch Allyn Connex Spot Monitor
214 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Appendix
Specifications
Physical specifications
Protection classifications, all monitor configurations
Characteristic Specification
Electrical rating 100 – 240 V AC, 50 – 60 Hz, 0.8X– 1.5 A
Duty cycle Continuous operation
Type of protection against electric shock Class I internally powered
Degree of protection against electric shock, for parts
applied to patients
Type BF defibrillator proof
IEC EN 60601-1, 2nd and 3rd editions
Recovery time following defibrillator discharge
Less than or equal to 10 seconds
Flammable anesthetics
WARNING Not suitable for use with
flammable anesthetics.
Degree of protection provided by the enclosure with respect
to harmful ingress of liquids
IPX1 Protection against vertically falling drops of water
Height Standard chassis: 6.3 in. (16.1 cm )
Extended chassis: 6.5 in. (16.6 cm ) with Braun
Extended chassis: 6.4 in. (16.6 cm ) with SureTemp
Width Standard chassis: 9.2 in. (23.4 cm )
Extended chassis: 11.7 in. (29.8 cm ) with Braun
Extended chassis: 11.7 in. (29.8 cm ) with SureTemp
Depth Standard chassis: 2.3 in. (5.8 cm )
Extended chassis: 4.4 in. (11.0 cm ) with Braun
Extended chassis: 4.2 in. (10.6 cm ) with SureTemp
133

Table of Contents

Other manuals for Welch Allyn Connex Spot Monitor

Related product manuals