3. In your Bluetooth program manager on your laptop task bar, select the monitor from
the list of available devices.
A message appears indicating that the monitor has been discovered and displays a
confirmation number on both the laptop and monitor screens.
4. Confirm that the numbers match on the laptop and on the monitor, and then touch
Accept.
A message appears indicating that the monitor and laptop are paired.
5. Touch OK.
A screen appears that allows you to change the laptop name to a preferred name.
6. Enter the preferred name, and then touch Save.
The new name appears in the list of paired devices.
Connect Bluetooth devices and download data
1. In the Bluetooth connection screen, select a laptop from the list of paired devices.
The Bluetooth icon in the Device Status area blinks on and off quickly as the monitor
and laptop are connecting.
When the monitor and the laptop connect, an information message appears briefly
that names the connected laptop. When the message disappears, the name of the
connected laptop appears on the top left of the screen, and the Bluetooth connected
icon (Bluetooth icon with a border around it) appears in the connection area.
2. As the laptop downloads data, observe the progress indicator spin in the connection
area.
The Bluetooth connection remains active until the download is complete. After a
successful download, the system clears data from the monitor and disconnects the
monitor from the laptop.
3. Repeat the process as needed, or touch Cancel to dismiss the Bluetooth connection
screen.
Rename a laptop
You can rename a paired laptop from a system or generic name to a specific name.
1. Select the arrow button to the right of the laptop name you want to edit in the paired
list.
A screen appears that allows you to change the laptop name to a preferred name.
2. Enter the name, and then touch Save.
The new name appears in the list of paired devices.
42
Bluetooth® wireless technology Connex
®
Spot Monitor
To Next Page
Loading...
