When Push Button
is
Released:
When
the push button is released, a current flows instantaneously through the pull-in coil in
the opposite direction as shown in Figure
below. Therefore, the forces of the holding coil and
pull-in coil are balanced. As a result, the plunger is returned by the return spring.
Simultaneously, the pinion is disengaged from the ring gear, the contact plate is disconnected,
and the starter is promptly stopped by the armature brake.
When push button
is
released
Glow Plugs
Glow plugs are used for each pre-combustion chamber of the cylinder head to make starting
easier. The
glow plugs are quick-heating type, which make starting easier with short pre-heating
time.
Construction
of
bar
glow
plug
1.
Housing
2.
Metal Tube
3.
Insulating Powder
4.
Heat Coil
(~
(~
~··"···f.l..·~
(1)
(2)
82
To Next Page
Loading...
