Operation
0110−1/A1
Winterthur Gas & Diesel Ltd.
3/ 3
WARNING
Injury Hazard: Before you operate the engine make sure that no
personnel are near the flywheel.
39) In WECS−9520 manual control panel (on the local control panel), push the
SLOW TURNING button (4618−1, Local Control Panel, paragraph 2.1). The
engine will slowly turn one time (see also Slow Turning 0220−1).
40) Make sure that at the location where you want to start the engine, the related
WECS−9520 control panel has control (e.g. the bridge, control room or local
control panel).
41) Tell personnel on the bridge that the engine is prepared for operation.
Prepare for Engine Start after a Short Shut-down Period (One or More Days)
2014
To Next Page
Loading...
Need help?
General
