Operation9308−1/A1
Winterthur Gas & Diesel Ltd.
10/ 10
From the ICC-INJ card, the firing pressure control function can be set ON as follows:
Select [Shift] + [Arrow UP]
To confirm, select [Shift] + [Enter] (see the workflow in Fig.15).
Fig. 15: Firing Pressure Control − Set to ON Workflow
4.4 ICC-INDICATION Card
The ICC-indication card (see Fig. 16) displays the data that follows:
The compression firing pressures and firing pressures for each cylinder unit.
The firing pressure set-point.
The air pressure and air temperature upstream of the TC compressor.
The scavenge air temperature.
Fig. 16: FlexView ICC INDICATION Card
2014
To Next Page
Loading...
Need help?
General
