WinGD WARTSILA RT-flex58T-D User Manual

Summary for Maintenance Manual
(MM)
Page No. Title Subject
Date No.
new exch.
Modification Service
Engine Documentation
RT-flex58T-D Version 2
Supply Unit Aft End
Modification
Page or
Manual
Date of publication 2014-01-09
9403-5/A1 (36) 2014-04 Tool List Tools: 94211, 94212 deleted x
Date of publication 2014-04-02
0352-1/A1 (1) 2015-08 EAAD086016 Tightening Values
New tightening values for elastic studs of cylinder cover (new
pre-tensioning jack)
x
2708-2/A1 2015-08
EAAD086016
tensioning of cyl.
Cover studs
new pretensioning jack for cyl. Cover GF94215A x
9403-3/A1 (1, 5) 2015-08
EAAD086016
Pre-Tesnioning jacks New jack for Cyl. Cover studs x
9403-5/A1 (30) 2015-08 EAAD085234 Tool List
Tool numbers 94871 and 94871A added, new cyl. Cover press
GF94215A
x
Date of publication 2016-02-17
2751-2/A1 2018 WinGD Input
Exhaust Valve:
Disassemble and
Assemble
Pge: 7. Paragraph 3.4 - Procedure changed. x
5552-5/A1 2018-02 Wartsila Input
Lubrication of Supply
Unit during
Maintenance
Procedure changed
x
Group 5 ToC 2018 WinGD Input ToC Analog Actuator replaced with Digital Actuator x
5801-1/A2 2018 WinGD Input
Regulating Linkage -
Woodward ProAct II -
Digital Actuator
Procedure changed. Analog actuator replace with digital
actuator
x
9403-5/A1 2018-01 DAAD083068 Tools List Page 36: 94844 Lubrication device added. x
Date of publication 2018-02
2/2 09/04/2018

WinGD WARTSILA RT-flex58T-D Specifications

General

Brand	WinGD
Model	WARTSILA RT-flex58T-D
Category	Engine
Language	English