98
ENGLISH
Danger!
When moving the bed to different positions, it must be ensured that no persons,
body parts or objects are in the adjustment area or between the head / foot end
and under the patient surface.
+ +
To reset the handset, the three buttons shown above must be pressed simultaneously until
the LEDs for the function keys have ashed. The handset software is reloaded. Alternatively,
disconnect the bed from the power supply and reconnect after 3 minutes.
Handset reset
The adjustment is made via the corresponding buttons of the handset.The back rest moves
towards the head end of the bed during the upward motion. This function enables patients/
residents to nd a comfortable position without the feeling of becoming restricted in the upper
body area. The natural movement of the body is thus supported by this technology.
Auto contour
The adjustment is made via the corresponding buttons of the handset.
+
\
+
\
Backrest
To Next Page
Loading...
