Xantrex XW - Installation

2
Installation
Chapter 2, “Installation” contains information and
procedures to install the XW Automatic Generator
Start.
For this Topic.... See....
“Tools and Materials Required” page 2–2
“Choosing a Location” page 2–2
“Routing the Connections” page 2–3
“Mounting the Unit” page 2–4
“Wiring to the 20-contact Connector” page 2–5
“Connecting the Generator” page 2–8
“Connecting the Thermostats (optional)” page 2–22
“Connecting an External Shutdown (optional)” page 2–22
“Connecting the Wiring Harness to the XW Auto
Generator Start”
page 2–26
“Connecting the XW Auto Generator Start to the
Xanbus Network”
page 2–27
“Verifying Power Is Available” page 2–28