Xerox
®
DocuMate
®
3115
User’s Guide
69
Click one time on the default value, 0.00 in each field, to enable the control box for you to input the
start position and redaction area size. The units of measurement is displayed on the lower-right corner
next to the Paper size field.
•
From left—input the upper-left corner start position measured from the left-side of the page.
•
From top—input the upper-left corner start position measured from the top of the page.
•
Width—input the width of the area to be removed.
•
Height—input the height of the area to be removed.
Color—this color field shows the selected fill color for the redacted area(s). When the software removes
the area you specify, it fills the area with the color you have selected here. To change the color, click the
artist palette button to open the Windows color palette. Select the color you want then click on
OK. The
color you selected will now display in the
Color field on the Redaction Settings tab.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
