A.6 Installing the Hard Disk 285
8. Tighten the two screws to secure the
control board in place.
9. Connect the power cord to the printer.
Press the <|> side of the printer's power switch to turn on the power.
10. Print the [Configuration Report] and confirm that [Hard Disk] is included for the
[Machine Configuration] item in the [System Settings] section.
Refer to
• List printing procedure: “Printing a Report/List” (P. 222)
Hard disk installation is now complete.
Note
• After installing the hard disk, use the properties dialog box of the print driver to change the printer
configuration. For details, refer to the online help for the print driver.
To Next Page
Loading...
Need help?
General