288 A Appendix
The installation is now complete.
Next, continue from step 9 enable the Feature Enhance Kit feature from the control panel.
Important
• Once you install the Feature Enhance Kit and enable it with the control panel, that Feature Enhance Kit
is not usable on any other printer.
9. Press the <Menu> button on the control
panel to display the menu screen.
10. Press the < > button until [Admin Menu] is
displayed.
11. Press the < > or <OK> button to select.
[Network/Port] is displayed.
12. Press the < > button until [System
Settings] is displayed.
13. Press the < > or <OK> button to select.
[Alert Tone] is displayed.
14. Press the < > button until [Software
Options] is displayed.
15. Press the < > or <OK> button to select.
The [FeatureEnhance kit] is displayed.
Note
• If the message [Install options unavailable] appears, it
means that the Feature Enhance Kit ROM is not
installed correctly. Re-install the ROM.
16. Press the < > or <OK> button to select.
[Enable kit] is displayed.
17. Press the < > or <OK> button to select.
[Press OK to enable] is displayed.
18. Press the <OK> button to apply the setting.
The setup process starts.
Menu
LanguageEmulation
Menu
Admin Menu
Admin Menu
Network/Port
Admin Menu
System Settings
System Settings
Alert Tone
System Settings
Software Options
Software Options
FeatureEnhance kit
FeatureEnhance kit
Enable kit
FeatureEnhance kit
Press OK to enable
FeatureEnhance kit
Enabling…
To Next Page
Loading...
Need help?
General