60 3 Printing
3. Click [Custom Paper Size].
4. Select an item from the [Details] list.
5. Under [Settings for], specify the length for [Short Edge] and [Long Edge].
Use key input or the [ ] and [ ] keys to specify the lengths.
Even if the [Short Edge] setting is within the allowable range, you cannot specify a
value that is greater than the [Long Edge] setting. Conversely, even if the [Long Edge]
setting is within the allowable range, you cannot specify a value that is less than the
[Short Edge] setting.
6. To name the paper size setting, select the [Name Paper Size] check box and then
enter a name in [Paper Name].
A paper name can be up to 14 single-byte characters long.
7. To define other custom paper sizes, repeat Steps 4 to 6 of this procedure.
8. Click [OK] to close the dialog box.
9. Click [OK] to close the [Properties] dialog box.
3
4
5
6
To Next Page
Loading...
Need help?
General