3.4 Printing after Changing the Paper Types of Trays 1 - 4 65
3. The [Paper/Output] tab appears.
Click [Paper Select].
4. For [Paper Tray], select [Tray 1].
5. Click [Paper Settings for Tray] to display the [Paper Settings for Tray] dialog box.
6. For [Paper Type], select [Bond] and then click [OK].
Note
• The paper type selected here is valid for this job only. Configuring this setting does not change the paper
type setting on the control panel.
7. For [Paper Size], select the size of the document to be printed, and then click [OK] to
close the dialog box.
3
5
4
To Next Page
Loading...
