74 3 Printing
3. On the [Paper/ Output] tab, specify “2” or more for [Quantity].
4. For [Job Type], select [Sample Set].
5. Click [Setup].
The [Sample Set] dialog box appears.
6. Enter your user ID into [User ID].
The user ID can be up to 8 single-byte alphanumeric characters.
7. For [Document Name], select [Enter Document Name] or [Use Existing Name].
If you selected [Enter Document Name], name the document by entering up to 12
single-byte characters into [New Document Name].
If you selected [Use Existing Name], the document name will be the name of the
document to be printed. If the printer cannot identify the name of the document, the
date and time that the document will be printed is used for the name.
8. Click [OK].
9. On the [Paper/ Output] tab, click [OK].
10. Click [Print] on the [Print] dialog box to start printing.
4
3
5
7
6
To Next Page
Loading...
Need help?
General