FreeFlow Process Manager Operator and Administrator Guide
xi
Electrical Safety
Always follow a code of safe habits as described in the following
statements:
1. Use only the power cable supplied with this equipment.
2. Plug the power cable directly into a properly grounded
electrical outlet. Do not use an extension cord. If you are not
sure whether or not an outlet is properly grounded, consult a
qualified electrician.
3. Do not use a ground adapter plug to connect this equipment to
an electrical outlet that lacks a ground connection terminal.
WARNING: Improper connection of the equipment grounding
conductor can result in severe electrical shock.
4. Do not place this equipment where people might step or trip on
the power cable.
5. Do not place objects on the power cable.
6. Do not override or disable electrical or mechanical interlock
devices. Covers, guards, and interlock switches are provided
to prevent operator access to unsafe areas.
7. Do not obstruct ventilation openings. These openings are
provided to prevent overheating of the machine.
WARNING: Never push objects of any kind into slots and
openings on this equipment. Contacting a voltage point or shorting
out a part could result in electrical shock or fire
8. If any of the following conditions occur, turn off the machine
immediately and disconnect the power cable from the
electrical outlet. Contact an authorized Xerox Service
Representative to correct the problem:
• The equipment emits unusual odors or makes unusual noises.
• The power cable is damaged or frayed.
• A wall panel circuit breaker, fuse, or other safety device has
been tripped.
• Liquid is spilled into the machine.
• The machine is exposed to water.
• Any part of the machine is damaged.
To Next Page
Loading...
Need help?
General
