FreeFlow Process Manager Operator and Administrator Guide
2-65
Workflow Builder
Setting up or modifying a text watermark
Text watermarks can consist of multiple lines with hard line
breaks. They can be created in a variety of font types, sizes and
colors; can be transparent or opaque, rotated, or variably
positioned from the document edge; and can appear either
underneath or on top of the page content.
To set up or modify a text watermark
1. Double-click the Watermarks step in a workflow.
2. Select one of the following:
•Select [New], and then select [Text Watermark] to set up
a new text watermark.
• Select a watermark from the list, and then select [Modify]
to change an existing text watermark.
3. To change the font typeface, select a font from the Font name
drop box.
4. To change the font style, select a style from the Font style drop
box.
5. To change the font size, select a point size from the Size drop
box.
6. Select a color for the watermark from the Color drop box.
a. To select a color that is not available in the drop box,
select [Customize...].
b. Select the desired Hue, Saturation, and Value.
7. In the text box, enter the desired text. Line breaks are
accepted.
NOTE: The text box supports variable data syntax when the
workflow is submitted from FreeFlow Process Manager MAX,
Manifest Automation from Xerox. The content of the text
should be specified as follows: (e.g.”Order Number: $CSV1$ -
Job ID: $CSV2$”). Variable text is specified by the Order
Jacket file column number (e.g. $CSV1$). All non-variable
text, including spaces, will be treated as static text. If the
workflow is submitted in ways other than via Process Manager
MAX, variable data text will be ignored.
To Next Page
Loading...
Need help?
General
