FreeFlow Process Manager Operator and Administrator Guide
2-171
Workflow Builder
Setting up external processes
The External Process Setup dialog allows you to set up or edit
process icons, names, and profiles, or to delete a profile from the
Process Profiles list. It includes the following options:
Process icon: Allows you to select an icon.
Process name: Allows you to enter a name for the external
process.
Process profiles: Lists, by name, the existing profiles up to a
maximum of 10. Listed profiles are selectable.
Add folder profile...: Available if 9 or fewer profiles are
configured. Opens the Folder Profile Setup dialog, which allows
you to enter a new configuration. If there are ten profiles
configured when [Add] is selected, the Maximum Allowed error
dialog displays.
Add CLI profile...: Opens the CLI Profile Setup dialog which
allows you to enter a new configuration.
Edit...: Opens the setup dialog for the selected profile.
Delete: Deletes the selected profile with a confirmation dialog.
See also:
Setting up folder-based profiles
Setting up CLI profiles
Using third party external processes
To Next Page
Loading...
