FreeFlow Process Manager Operator and Administrator Guide
2-78
Workflow Builder
7. Specify the Vertical Placement as either: Place text below
bars or Place text above bars.
8. Specify a Horizontal Alignment, either [Left], [Center], or
[Right].
9. Select or type the text Vertical offset.
10. Select or type a Horizontal offset.
11. From the font drop boxes, specify the font, font style and font
size.
12. Select [Always use these settings] to prevent users from
modifying the settings. The settings will appear in the
Submission Client controls, but will be grayed out and
unchangeable.
13. Select [OK] to accept the changes or select another tab to
continue configuring.
To Next Page
Loading...
