Xerox FreeFlow

FreeFlow Process Manager Operator and Administrator Guide
2-97
Workflow Builder
• 3 Up: Each page is imaged three times on one side of a sheet
of paper.
• 3 Up Flip Left: Each page is imaged three times on one side
of a sheet of paper with the left of the three imaged pages
flipped 180 degrees to appear upside down.
• 3 Up Flip Right: Each page is imaged three times on one side
of a sheet of paper with the right of the three imaged pages
flipped 180 degrees to appear upside down.
• 4 Up: Each page is imaged four times on one side of a sheet
of paper. There is no flip option for 4-Up.
• 8 Up: Each page is imaged eight times on one side of a sheet
of paper. There is no flip option for 8-Up.
• 16 Up: Each page is imaged sixteen times on one side of a
sheet of paper. There is no flip option for 16-Up.
• Custom N-Up: Allows the user to specify rows and columns in
combination with Orientation, Sides Imaged, Margins, Paper
Stock, and Autofit options. The following options are grayed
out if Custom N-Up is not selected:
– Rows (maximum of 16)
– Columns (maximum of 16)
– Pages on Sheet Side; Repeated; SequentiaI; Cut and
Stack; Alternating
• Maximum N-Up: Given an input page size, calculates how
many of those pages can be fit onto the sheet. See also
Maximum N-Up considerations and Maximum N-Up
limitations.