Xerox FreeFlow

FreeFlow Process Manager Operator and Administrator Guide
2-116
Workflow Builder
2. Select one of the following:
NOTE 1: You might be prompted for a login and password if you
attempt to access a mapped location.
NOTE 2: Prior to perfoming operations that require repository
access, you must set up and save your repository credentials in
FreeFlow Process Manager. If you select [Browse Repository]
and no credentials have been established, you will be prompted to
enter credentials. For more information, see
Setting up repository
credentials.
•[Browse Windows...] to open the Windows file dialog for
selecting a file location.
•[Browse Repository...] to open a repository dialog for
selecting a repository location.
The Location text box is populated with the path specified
during the browse process.
3. Select [Save job ticket information] to save a job ticket (.xpf)
with the PDF file for reprinting later. The .xpf job ticket is
saved, along with the PDF file, in the location designated in
Save.
4. Select [Always use these settings] to prevent users from
modifying the settings. The settings will appear in the
Workflow Submission Client controls, but will be grayed out
and unchangeable.
5. Select [OK] to accept the changes and close the window.